Showing posts with label Heraldry. Show all posts
Showing posts with label Heraldry. Show all posts

Monday, December 31, 2018

Transferring a Design

I'm starting a new piece, this time a rendition of my wife's heraldry. Here is Cwen's registered device:
Per fess sable and argent, two decrescents and a bear stantant gaurdant within a bordure all counterchanged

I offered to make this in metal thread similar to the rendition I had recently done of my own device. Since her device is in sable and argent, I had the idea of doing "or nue" (shaded gold) using silver metallic thread rather than gold.

The first step, of course was to draw out the design. I'm never terribly happy with my drawing skills, but I eventually came up with the following. I was pretty happy with this design, and Cwen liked it as well. 

The bear sticking out its tongue was particularly amusing, a detail I copied from a number of heraldic devices I found online, such as this one from the city of Bern:
Image result for heraldic bear arms

I'm embroidering this badge on black linen. After stretching the linen in my slate frame, I got ready to transfer the design. The badge will eventually be appliqued onto another item, so I didn't need to be too careful about centering the badge in the frame. I roughly centered it, and pinned it into place.

One of my Xmas gifts this year was a pricking and pouncing set, used to transfer designs from paper to fabric. The pricker is basically a pin vise used to hold a small crewel needle. You use this to poke holes in the design through the paper. I poked holes every few millimeters. I had done this before with a plain needle, but found the vice made it much more comfortable to hold the needle while this task. Pricking holes in a large or complex design can be a bit tedious, so anything that makes it more comfortable is welcome!

Once all the lines had been pricked, I got out my new pouncer. This is basically a wooden knob with a bit of felt glued to one end. It would be really easy to make these! But, my set came with one pre-made. 

The set came with dark grey pounce, made from crushed charcoal and cuttlefish bone. This pounce is a pretty dark grey, so I didn't think it would be terribly visible against the black linen background. But, I read a great hint that you can use flour in a pinch as white pounce. I tapped the pouncer into a small amount of flour, and then rubbed the pouncer around the design, over all of the holes. 

Once I had gone over the entire design, I unpinned one end and peeled the paper up to confirm that the entire design had been transferred. The flour worked pretty well! I found I'd pricked a few too many holes in the face, so a bit too much flour came through and the design there was a bit less clear than I would have liked. But, it was good enough that I could make out the entire design. Good learning for next time!

Knowing that the fine powder wouldn't last long, I traced over the lines with a white chalk pencil, then did a quick backstitch over the lines with white thread to ensure the design would remain visible while I worked the embroidery.

Finally I stitched some guidelines across the piece to help me keep my silver work straight as I work the item, and it was ready to start the silverwork.

Next time: Argent nue?

Tuesday, December 25, 2018

Or Nue Heraldic Bee, part III

As described in the last two installments on this project (see part I and part II), I had created an Or nue depiction of my arms, and decided to mount it to some very nice maroon wool I had to make a pouch. Now that the goldwork was done, it was time to affix it to the wool and complete the pearling and goldwork around the outside of the Or nue.

My first step was to mount one side of the wool outer pouch material to my slate frame. I read a few articles online with some suggestions on how to do this:
The last one in particular had a great suggestion about using pins along the hem of your fabric to help distribute/support the tension on the fabric across the width of the piece. I ended up using this idea. I first attached a linen strip to each of the two end pieces, and then affixed the embroidery fabric to the linen strips using a herringbone stitch. 

I then pinned the hem along the sides, and inserted the side slats. As I laced the sides to the slats, I used a backstitch just inside the pins. This really helped keep the sides straighter as I put tension on the width of the fabric.  Once the two sides were laced up, I pulled on one of the end slats to stretch out the length of the fabric as much as I could, and then inserted the cotter pins to maintain that tension. In the picture below, the longer laces at the top and bottom are the sides of the work (ie, the frame is rotated 90 degrees). The fabric has been hemmed over about a half inch along each of the sides, and the stitches were run through the hem.

Once the fabric was framed up, I measured out the center point, and used it to center the cut out goldwork on the wool, and pinned the work into place. 

I then used the same green silk to applique the goldwork onto the wool ground. The edge of the goldwork was a bit rough looking. I also noticed that in a few places, the white linen ground under the goldwork was peeking out from under the applique. To fix these problems, I  took a pass around the work in split stitch. Even though the edge will eventually be covered up by pearl purl, I liked how this really helped smooth out the work and made it look a bit more finished.

Monday, December 24, 2018

Or Nue Heraldic Bee, part II

I've been a bit busy and ill this month, which took some time away from my projects. I also had a delay while I waited for some more green silk to arrive, as I was out of the color I was using and had to order online. But, I finally was able to finish up the Or nue (shaded gold) embroidery of my device earlier this weekend. (See my previous post on this project here.) 

I'm pretty happy with how the Or nue turned out. I am also really happy with how my slate frame worked. Although I was still figuring out how to dress the frame properly, and basically just made it up as I went along, the tension turned out quite nicely. When I took the embroidery off the frame, as you can see, the tension remained quite smooth.

The next step was to figure out what to do with this goldwork, now that it's complete. I decided to make a pouch out of it, which I can use to hold tokens/favors that I can give out at events when I see artwork or A&S display entries that I particularly like. I found some maroon/purple wool in my stash that I particularly like and thought looked sumptuous and sturdy enough to support the goldwork. 

I also found some seed pearls in my stock and had ordered some gilt pearl purl, a kind of gold wire which has been wound into a springlike form. I'm planning to use these to outline the goldwork, and help smooth out the edges of the embroidery. At first I was thinking of using the seed pearls in the picture below, but then I found some that were a little smaller and were a better fit for the size of the goldwork. The teal is another wool that I had in our stash. I wasn't sure at first which color to use, but eventually decided on the maroon since the teal was a bit lighter in weight, and didn't contrast as much against the green in my embroidery.

Saturday, December 1, 2018

Or Nue Heraldic Bee, part I

When I started playing in the SCA again recently, I decided to do a goldwork project, and picked my device as the theme. I figured I could present this at an Athena's Thimble panel as my first submission, it would let me practice Or Nue again, and I'd have a new item to display my heraldry.

Or Nue (French for "shaded gold") is a technique that was commonly used in period, in particular for ecclesiastical garments. There is a great article here by Jane Zimmerman which gives an introduction to the technique. The gold threads in Or Nue are typically thin strips of gold foil wrapped around a fiber core (what today is referred to as "Japan gold"). The foil is a bit "scaly" in texture, so it doesn't pass through fabric terribly well. Instead, it was worked by laying the gold across the surface of the fabric and couching it down with silk. For large fields, a brick or similar pattern could be used to give a shade of color, or the couching could be closer together for a more solid color. In the main design, the gold may be so close together that you just get solid blocks of silk color, with the gold just peeking through in spots. The gold is of course very sumptuous looking, and reflects light very well, especially in lower light settings like candle-light, giving the overall work a nice bit of flash.

Image result for or nue
An example of period Or Nue, detail of Mantle of the the Vestments of the Order of the Golden Fleece
(Kaiserliche Schatzkammer, Vienna)

I have had a banner for many years which looks like this. I used this as a starting place, although I decided to change up the style of the flowers and bee, and to work it as a circular badge.
Vert, a bee proper winged between three octofoils Or
My new slate frame, and just getting started with the goldwork. I was able to work on this quite a bit at Autumn's Inspirations, and got a lot of positive feedback as I did so.

So, I started out the project by drawing out the cartoon for the project, then digitizing it so I could play with the size to something that felt right. I'm not the best at drawing, but I eventually came up with a design with which I was pretty happy. I transferred the design to some linen, and blocked it off on my cherry wood slate frame (brand new for this project!). I already had the colors of silk I needed in Au Ver a Soie's "Soie d'Alger" line (my preferred brand), and I got some amazing No. 9 British Glossy Japan thread from Berlin Embroidery.

I ended up basting a few vertical lines across the work to help with keeping the goldwork parallel throughout the course of the project. The gold was laid and couched down in paired rows. The green field was couched with a rough checkerboard pattern to give it a nice dark tint while also allowing a lot of the gold metal to shine through. As you can see, the first several passes were all fieldwork which went relatively quickly. Once I started hitting sections of the design, I would couch in the appropriate color. This made the stitching slower as I had to coordinate through various colors.
The same pass started both the first star, as well as the edge of the bee's wing, so I suddenly went from one color (green) to four (green, black, yellow, ecru).

While I was working with a particular color, I had my other silk color strands pinned off to one side to keep them out of the way. Eventually as the bee got thicker, I ended up actually having two green strands, one for the top of the piece, and one for below the bee, to avoid wasting a lot of silk going back and forth across the length of the bee behind the scenes.

About 1/3 done.

As I was working the piece, I realized that the linen and the design stretched a bit unevenly when I dressed the frame, so I ended up having to eyeball a few modifications to the design to keep it more or less even and circular. Lesson learned for next time - for stretchier fabrics, dress the frame first, then trace the design.

About halfway done. As you can see, the two sides of the bee are not quite mirror images, so I used the lines as suggestions and started eyeballing to "even up" the two sides.

I also found that the center of the piece, which was couched much more densely, had a tendency to "bulge" over as a result and the goldwork didn't lie completely parallel. The guidelines I basted in made it easy to notice this happening, and then I would work in extra passes above or below the bee to fill in the work and bring the background back to parallel. The effect isn't terribly noticeable. Jane Zimmerman's article above does mention the possibility of this happening, and suggests leaving very tiny gaps (1/16" or less) between the passes of gold to leave space for the couching and prevent this from happening. I read her suggestion about halfway through the project, and was happy with the result when I started putting it into practice. 

Extreme close up!!
And, here's where I currently stand with the project. Unfortunately I lost this game of "embroidery chicken" and ran out of silk before I could finish it, so I'm waiting for more to arrive. I was unable to find the shade I needed here in the Boston area, so I ordered some online from Needle in a Haystack.
Current state of progress. Some of the edge turns are a bit rough, but they'll be covered up later when I applique this onto a pouch.

Goldwork Heraldic Frog

My second piece of goldwork was a heraldic pouch I made for then Queen Æsa of Northshield, using her personal device as a design. I was inspired to work on this when I first saw a drawing of her device, which had just recently been approved. The frog was just begging to be done in goldwork.

This picture is a closeup of the Or nue and brick-patterned goldwork embroidery. The frog is carried out in a basket-weave pattern.

Worked in Japan gold, and blue and red silk on blue and red velvet ground, appliqued onto faux suede. The frog emblem has several layers of wool felt padding under the embroidery to "poof" it up. The frog is outlined with gold pearl purl, and the device is outlined in freshwater pearls.

I entered this piece in an Arts and Sciences competition at Warriors and Warlords, where it took first place. After the competition, one of the other entrants, Master Gevehard von Baden, told me he was the herald who had come up with the "splatty frog" design! We had a good laugh over that.